FRS-107 Product Features
MS sealant is a high-end product specially designed for bonding and sealing in interior decoration and decoration projects. It has a wide range of bonding materials and can basically cover the bonding between various materials. It is especially suitable for wood, ceramic tiles, stone, metal, and plastics. Bonding and sealing of other materials, no pollution, zero formaldehyde, zero toluene, zero isocyanate, no smell during use.
FRS-107 Product Parameters
| Application Method | Use with applicators |
| State | Paste |
| Model Number | FRS-107 |
| Product Name | MS sealant
|
| Color | White；Black；Gray; Customized |
| Feature | long service life, environmental protection and pollution-free. |
| Type | Modified silanes |
| Use | ① Suitable for sealing during interior decoration, caulking sealing of corners, floors, and walls, and bonding and sealing of high-end furniture and decorative panels. ② Suitable for bonding and sealing of various cabinets, ceramic tiles, countertops, and suspended ceilings. |
| Shelf Life | 12 months |
| Certificate | GB/T 14683-I-F-20HM |
| Packing | 450g Rigid Packing/ 750g Flexible Packaging/ 200kg Drum /Customized |
| Selling Units | KG |
| Single Package Size | 5.2*5.2*23 cm |
| Single Gross Weight | 0.52 KG |
| MOQ | 1440pieces |
FRS-107 Product Application Scenarios
① Suitable for sealing during interior decoration, caulking sealing of corners, floors, and walls, and bonding and sealing of high-end furniture and decorative panels.
② Suitable for bonding and sealing of various cabinets, ceramic tiles, countertops, and suspended ceilings.
FRS-107 Product User Guide
①Clean the construction surface to ensure it is dry and free of oil and dust;
② Paste protective tape on both sides of the construction. If the joint is too wide, fill the joint with lining material;
③ Cut the mouth of the bottle and install the glue nozzle. Cut the glue nozzle according to the required size and squeeze it out with a glue gun;
④ The sealant squeezing action should be carried out continuously to make the glue evenly squeezed out and move evenly and slowly to ensure that the joint is filled with sealant. It is necessary to prevent the nozzle from moving too fast and causing bubbles or cavities;
⑤ Complete the trimming within 10 minutes after gluing and remove the protective tape;
⑥This product reacts with moisture in the air and solidifies. It dries to the surface in 1 to 3 hours at room temperature and forms a solidified layer on the surface in 1 day. Depending on the contact area with air and bonding depth, it takes 1 to 7 days to cure to achieve the best effect.
FRS-107 Product Details
